Master the Art of Sharpening with the Best Lawn Mower Blade Sharpener

You’ll want the highest quality when you buy lawn mower blades. This will ensure that the blade is durable and helps your mower run more efficiently.

The best blades are constructed of stainless steel because it’s durable. They don’t rust, and look stunning on the lawn.

Straight Blades

The first blades that come with your lawnmowers are most likely to be straight. They are great for side discharge and bagging however, they’re not ideal for mulching due to the lack of lift. You should consider purchasing a high-lift blade if you’re in search of one that does both. They have a curving edge that helps lift the clippings. They work best when you have tall or thick grass.

The blade’s side facing upwards has raised wings, or tiny ridges that raise in order to form an air vacuum and pull the grass up for an even more precise cut. This type of blade is useful on damp or dry surfaces, however it’s more efficient at cutting thicker grass.

High-Lift Blades

They are easily identifiable by their distinct upward curve at either end High-lift blades generate strong airflow that pushes clippings into bags or side chute. They also provide a more precise cutting for your lawn, and can help you avoid clumping when cutting tall grass.

This is because the blades generate greater suction and flow. If you’re in a sandy soil, the dirt that they lift will quickly ruin your lawnmowers and result in premature wear.

In contrast to other replacement mower blades, you don’t need to take off your mower deck in order to replace these blades. You can access the bolts that hold the old blade by lifting the deck of the mower. Be careful with the blade’s sharp edge when replacing it. Replace the blade after removing the old one. Test it for fit. You’ll then be ready to get back to working.

Multi-Purpose Blades

These blades are multi-functional and can be employed to bag, cut, or side discharge your grass clippings. These blades generate suction and airflow, and help cut the grass into smaller pieces that can be spread out on the soil to provide nutrients.

This kind of blade is not suitable sharpening techniques for lawn mower blades mowing sand-covered terrains. This is because the airflow pulls sand, dust and other debris in the blade. This can result in the blade wearing quicker.

Check the blades original to them that were included with the pusher or tractor. It is important to look for particulars such as the blades’ length, as well as the diameter of the center hole. Then, compare them with the specifications of the blades you wish to buy. You can then be sure that the new blades you purchase will perform well and will fit on the mower. You might also want to consider the size of the blade. The blade’s thickness is vital. But, it will be determined by the length of time you will use your lawnmowers and the thickness it is.

Mulching Blades

A mower blade with a dramatic upward turn at the back is perfect for lawns where grass clippings have to be mowed. The blades have more lift to push the grass towards the deck and away from the chute for discharge. These blades also improve the cutting of thicker grasses. However, they may need more power from your engine, which can result in a higher cost for fuel.

The back of a high lift blade has a wider «wind wings» to improve airflow around the clippings which reduces suction and the amount dust that is released. These blades are great for riding mowers as they provide a more uniform, smoother cut.

A mulching knife installation is a matter of ensuring it is compatible with the mower you are using. Then, place a wood block in between the blade and its mounting bracket to keep it from turning while you tighten the nut. After that, using the ratchet that comes with the kit and washers, you can secure the blade.